Vimberg speakers

Vimberg speakers

Change your perspective and discover the difference. Pure. Clarity. Music.

The Voice That Is - an Authorized Dealer for Vimberg in Philadelphia, Pennsylvania, Delaware, New Jersey and Maryland areas.

Vimberg speakers - more than the sum of its parts. Much more.

For extraordinary results, TIDAL used drivers with ultra-stiff and very light diaphragms made out of diamond, ceramic and 3D-shaped honeycomb sandwich material from the specialist Accuton. Those parts were installed into literally low-noise, in-house manufactured cabinets that were constructed using heavy duty waterproof quality materials then finished with resonance damping VIMBERG - piano lacquer. At the heart of the Vimberg speaker is that they use only Mundorf and Duelund crossover parts - combined with their unique engineering and crossover designs, to create ultra-linear frequency responses, incredible timing and the complete lack of the driver’s diaphragm signature.

Common features in the VIMBERG Speakers

  • 3-way fullrange loudspeaker
  • VIMBERG MRD-cabinet with decoupled aluminum high-midrange mounting plate
  • 1 x 30 mm Accuton Cell ceramic tweeter
  • optional: 30mm Accuton Cell diamond tweeter, also upgradeable anytime later (Tonda D ; Mino D)
  • highend Mogami speaker cable wiring inside, Argento pure silver binding posts
  • VIMBERG highend crossover: linear frequency response with optimized impulse response, exclusive use of Mundorf & Duelund components.
  • Dual-Tune bass-reflex port design for lowest port noise and selectable F3
  • Decoupling height adjustable isolation gliders and 3D-shaped installation triggers for optimized setup and placement to every floor
  • Exclusive VIMBERG real piano lacquer: summit white or jet black

Specific to The VIMBERG Tonda speaker

  • 1 x 168 mm Accuton Cell ceramic midrange woofer,
    3 x 190 mm Accuton Cell woofer, long excursion design with 3D shaped honeycomb sandwich diaphragm
  • Height: 1432mm H x 650mm D x 439mm W (56.4" H x 25.6" D x 17.3" W)
  • Weight: 2 x 96 Kg / 212 lbs. (plus packaging)

Jeff Fritz of Soundstage Ultra purchases a pair of Vimberg Tonda speakers to replace his Wilson speakers. Read the story here:

Specific to The VIMBERG Mino Speaker

  • 1 x 90 mm Accuton Cell ceramic midrange woofer,
    3 x 168 mm Accuton Cell woofer, long excursion design with 3D shaped honeycomb sandwich diaphragm
  • Height: 1270mm H x 534mm D x 424mm W / (50" H x 21" D x 16.7" W)
  • Weight: 2 x 96 Kg / 159 lbs. (plus packaging)
  • Click the magazine cover to read the Stereophile Review

Specific to The VIMBERG Amea Speaker

  • 2-way fullrange loudspeaker
  • VIMBERG™ MRD-cabinet with decoupled aluminum high-midrange mounting plate
  • 1 x 30 mm Accuton™ Cell ceramic tweeter
  • 1 x 173 mm Accuton™ ceramic midrange woofer
  • 1 x 220 mm Accuton™ passive radiator
  • optional: 30mm Accuton™ Cell diamond tweeter (Amea D), also upgradeable anytime later
  • highend Mogami™ speaker cable wiring inside, Argento™ pure silver binding posts
  • highend crossover with VIMBERG™ monopulse technology: linear frequency response with optimized impulse response
  • exclusive use of Mundorf™ & Duelund™ components
  • exclusive VIMBERG™ VELVETEC: Summit White, Jet Black, Slate Grey, Sonoma Orange, Amethyst and other colors on request
  • optional on request: VIMBERG™ real piano lacquer: summit white or jet black
  • nominal impedance: 5 ohm (lowest point: 5.2 ohm at 100Hz)
  • efficiency at 2.83V/1m/1KHz: 86dB
  • weight without packagaing: 2 x 20 Kg (2 x 44 lbs.)
  • weight with packagaing: 1 x 45 Kg (1 x 99 lbs.)
  • shipment dimensions: W 51 x L 71 cm x H 62 cm
  • Marc Philips reviewed the Vimberg Amea speakers. Read the story here:

Vimberg speakers are made in the TIDAL Audio factory in Germany. For more info, click here.