R1 Receptacle and R0 Receptacle
The Oyaide R1 Receptacle and R0 Receptacle are the best power outlets for your audio system.
The importance of high-quality power supply connections is now widely accepted. Many enthusiasts install dedicated power lines for their hi-fi systems and no longer question the importance of the quality of the receptacle fitted to the wall. Conventional “hospital grade” connectors can improve the strength of the mechanical connection, but they are far from ideal for realizing the best sound quality.
They aimed to develop receptacles whose sole purpose was to deliver the highest sound quality possible. Every part has been designed with this in mind. Extensive research into the effects of plating methods has yielded three equally valid but different types of sound for you to choose from. The entire series is non-magnetic to avoid any disturbance from magnetic fields.
The Oyaide R1 receptacle / outlet has a High Quality Beryllium Copper base material, with platinum + palladium plating. 20 AMP rating resulting in a new and high level of performance. The use of heat-treated beryllium copper ensures mechanical integrity and high conductivity. It is 1.0mm thick and 6.0mm wide, reducing vibration at the point of contact with no signal transmission loss.
With the introduction of the R1, the category of wall outlet / receptacles may now be said to have reached the stage of true maturity.
Contacts are made of beryllium copper which had previously proven its superiority in the ultra high performance Oyaide M1/F1.
30% glass filled PBT is employed for its excellent machining characteristic and electrical isolation. Created under extremely high pressure, the body of the R-0 outlet is highly rigid. Its weight is increased over the previous model and improves damping ability. As a result of improved processing accuracy, the holding power of the blade is improved and unnecessary vibration is attenuated to the maximum extent possible. Moreover, its internal structural layout is that of a highly engineered load distribution.
Mounting Bracket: 24 Karat plated brass fittings for strength and durability of the Body and Insulator. The 1.5mm thick gold mounting frame has high strength and protects against feedback of unnecessary vibrations from the wall. The housing of the R-0 made with the ultimate in design and materials.
All screws are made of stainless steel. Due to its high rigidity, there is no problem such as a screw head rounded off. The maximum cable size is 5.5sq. inches. Thorough testing, the cable has never separated from the plug by a force less than 30kg.
Chassis is Highly rigid Glass filler, Polybutylene terephthalate for resonance control
To complete the R-1, the the material which was punched out as a part is polished by hand, piece by piece after machine barrel-polishing.
The contact of the R-1 is made of beryllium copper with platinum + palladium plating, same as the F1/M1 series using a new and high level of performance. The use of heat treated beryllium copper insures mechanical integrity and high conductivity. It is 1.0mm thick and 6.0mm in wide, reducing vibration at the point of contact with no loss of signal transmission.
Specifications:
Outlet 2 pole 3 wire grounding 20A 125V
Wire Insert Accepts 4 X 10 Gauge wire allowing for easy flow of high current
The material of the body is polypropylene which damps tiny vibrations of the contacts.
The contact of the R0 is made of beryllium copper, the same as the R1 and F1/M1 series, using a new and high level of performance. The Oyaide R-0 receptacle/outlet has an unplated High-Quality Beryllium Copper base material. 20 AMP rating.
The naked receptacle! No plating, just high-quality bare copper. Do your system justice and install an Oyaide R1 Receptacle or R0 Receptacle. You’ll love it!