Vimberg speakers

For extraordinary results, TIDAL used drivers with ultra-stiff and very light diaphragms made out of diamond, ceramic, and 3D-shaped honeycomb sandwich material from the specialist Accuton. Those parts were installed into literally low-noise, in-house manufactured cabinets constructed using heavy-duty waterproof quality materials and then finished with resonance damping VIMBERG – piano lacquer. At the heart of the Vimberg speaker is that they use only Mundorf and Duelund crossover parts – combined with their unique engineering and crossover designs, to create ultra-linear frequency responses, incredible timing, and the complete lack of the driver’s diaphragm signature.

Jeff Fritz of Soundstage Ultra purchases a pair of Vimberg Tonda speakers to replace his Wilson speakers. Read the story here:
John Atkinson reviewed the Mino. Read the Stereophile Review here.
Marc Philips reviewed the Vimberg Amea speakers. Read the story here:
Panagiotis Karavitis reviewed the Vimberg Tonda speakers. Read the story here:

Standard features in the VIMBERG Speakers

• 3-way full-range loudspeaker
• VIMBERG MRD-cabinet with decoupled aluminum high-midrange mounting plate
• 1 x 30 mm Accuton Cell ceramic tweeter
• optional: 30mm Accuton Cell diamond tweeter, also upgradeable anytime later (Tonda D ; Mino D)
• high-end Mogami speaker cable wiring inside, Argento pure silver binding posts
• VIMBERG high-end crossover: linear frequency response with the optimized impulse response, exclusive use of Mundorf & Duelund components.
• Dual-tune bass-reflex port design for lowest port noise and selectable F3
• Decoupling height-adjustable isolation gliders and 3D-shaped installation triggers for optimized setup and placement on every floor
• Exclusive VIMBERG real piano lacquer: summit white or jet black

Specific to The VIMBERG Tonda speaker

• 1 x 168 mm Accuton Cell ceramic midrange woofer,
  3 x 190 mm Accuton Cell woofer, long excursion design with 3D shaped honeycomb sandwich diaphragm
• Height: 1432mm H x 650mm D x 439mm W (56.4″ H x 25.6″ D x 17.3″ W)
• Weight: 2 x 96 Kg / 212 lbs. (plus packaging)

Specific to The VIMBERG Mino Speaker

• 1 x 90 mm Accuton Cell ceramic midrange woofer,
  3 x 168 mm Accuton Cell woofer, long excursion design with 3D shaped honeycomb sandwich diaphragm
• Height: 1270mm H x 534mm D x 424mm W / (50″ H x 21″ D x 16.7″ W)
• Weight: 2 x 96 Kg / 159 lbs. (plus packaging)

Specific to The VIMBERG Amea Speaker

• 2-way full-range loudspeaker
• VIMBERG™ MRD-cabinet with decoupled aluminum high-midrange mounting plate
• 1 x 30 mm Accuton™ Cell ceramic tweeter
• 1 x 173 mm Accuton™ ceramic midrange woofer
• 1 x 220 mm Accuton™ passive radiator
• optional: 30mm Accuton™ Cell diamond tweeter (Amea D), also upgradeable anytime later
• high end Mogami™ speaker cable wiring inside, Argento™ pure silver binding posts
• high-end crossover with VIMBERG™ monopulse technology: linear frequency response with optimized impulse response
• exclusive use of Mundorf™ & Duelund™ components
• exclusive VIMBERG™ VELVETEC: Summit White, Jet Black, Slate Grey, Sonoma Orange, Amethyst and other colors on request
• optional on request: VIMBERG™ real piano lacquer: summit white or jet black
• nominal impedance: 5 ohm (lowest point: 5.2 ohm at 100Hz)
• efficiency at 2.83V/1m/1KHz: 86dB
• weight without packagaing: 2 x 20 Kg (2 x 44 lbs.)
• weight with packagaing: 1 x 45 Kg (1 x 99 lbs.)
• shipment dimensions: W 51 x L 71 cm x H 62 cm

Vimberg speakers are made in the TIDAL Audio factory in Germany. For more info, click here.

The Voice That Is – an authorized dealer for Vimberg in the Philadelphia, Pennsylvania, Delaware, New Jersey, and Maryland areas.